User's Manual

Send SNMP Message for iSeries 61

At startup, the eTM retrieves the configuration, and launches all tasks that

are defined in the environment according to the configuration. As shown in

the example in Figure 59 "eTM - Site 3 - Environment LOCAL.reg" (page

60), the environment GNTN1SCTI launches the DECT Messengermodules

CSTA Server, and the module eKERNEL.

When a task is successfully launched, the logging section features a green

icon indicating a normal condition, as shown in Figure 60 "Green icon

indicates Normal Condition" (page 61).

Figure 60

Green icon indicates Normal Condition

When the tasks is ended — for example, by means of the Alt-F4 keystroke

combination — the eTM detects this and relaunches the missing task. This

is indicated in the log as shown in Figure 61 "Red icon indicates a task

that is no longer running" (page 61).

Figure 61

Red icon indicates a task that is no longer running

eTM checks every five seconds to ensure that each task is still running.

When the eTM is paused or stopped, the routine that verifies and restarts

the process is temporarily interrupted.

This interruption usually occurs during maintenance of one of more of the

programs that are guarded by the eTM. Such a temporary condition is

shown in the log as illustrated in Figure 62 "Yellow icon indicates a task

that is paused" (page 61).

Figure 62

Yellow icon indicates a task that is paused

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010