User's Manual

Send SNMP Message for iSeries 51

Table 1

Supported window styles (cont’d.)

Value Description

Window has focus and is restored to its original size

and position.

Window is displayed as an icon with focus.

Window is maximized with focus.

Window is restored to its most recent size and

position. The currently active window remains active.

Window is displayed as an icon. The currently active

window remains active.

— The keyword Shortcut denotes the command line parameter that

is used to launch the process.

•

The second section shows a log of the changes in the state of the

tasks.

• The third section shows some additional logging information, and is

updated when, for instance, a task is terminated from within the eTM

application.

•

The bottom section shows on the left a small icon that denotes the

current state of the eTM. This application can be started, paused or

stopped.

The eTM is launched by means of the following command:

Table 2

Launch eTM Command

C:\SOPHO Messenger@Net\Exe\eTM.exe

In most cases there is only one environment configured, and the eTM

uses this default configuration. When there is more than one environment

configured, a selection window opens that allows you to specify the

environment that must be started, as shown in Figure 52 "Specify the eTM

environment (when more than one is configured)" (page 52).

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010