User's Manual

46 Module - eSNMP

When the program is launched, a window appears and defaults to IP

address 127.0.0.1 and port 162. If Send SNMP Message is installed on

the same PC as the eSNMP module, the default value should not be

changed. If Send SNMP Message is installed on a different PC, adjust the

IP address and port to match the PC where eSNMP runs.

The window contains several input-capable fields that allow you to set

every parameter. When pressing the Send button, an SNMPv1 trap is sent

to eSNMP.

Figure 46

Send SNMP Message

The Send SNMP Message program is provided on “as-is” basis.

Send SNMP Message for Web

The Web Administrator provides a web-based interface to send SNMPv1

traps from the Web Administrator to the module eSNMP.

The implementation is based upon PHP script and hosted in the Apache

HTTP Server on the Messenger platform.

Since sending SNMPv1 traps is reserved for system administrators, the

SNMP trap is reserved for Web Administrator users with a security level

equal to administrator. Security level equal to administrator refers to users

in the eWEB_AUTH table defined with USERA_Sec_level of 50 or above.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010