User's Manual

Send SNMP Message for Win32 45

Figure 44

Supported replacement values

When the SNMPv2 syntax is used, the parameters enterprise OID, generic

trap, specific trap, and timestamp are not available. These missing

parameters are provided as value 0 so the existing implementation can

also handle SNMPv2 traps. You must specify 0 in the corresponding fields

to preserve the unique key.

The definitions are related to site and area. This means every instance of

eSNMP can have an appropriate definitions. The IP address of the sender

is included in the key.

When no GenericTrap field is available, the value 0 is used. The use of

the value 0 allows a flexible filtering of alarms, for example ignore one or

more traps by not specifying the corresponding alarm and, for example

assigning priorities.

Note that generic traps are reserved values in SNMP protocol, as shown in

the following figure.

Figure 45

Generic traps

Send SNMP Message for Win32

A sample program of Send SNMP Message is available on the DECT

Messenger CD in the directory 09-Add-ons\Send SNMP Message.

When you install the program, it resides in the directory C:\Program

Files\Send SNMP Message\Exe and is called Send SNMP Message.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010