User's Manual

440 Table: eWEB_USER_AUTH
USERA_Password_str
This field contains a 10-byte password. The eWEB interface allows users
to change their own password. Therefore you can create new users with
default passwords (for authorized, the same as the User ID), and ask
users to change their password when they log in for the first time.
Note: eWEB stores passwords without encryption in the Access 2000
database, and are therefore available to anyone who can access
the DECT Messengersystem. Depending on your configuration,
table information is accessible through eWEB. Because the security
mechanism is limited, Nortel recommends that users
not use the same
password used on other systems that contain secured information, as
that poses a serious security risk. Inform all users of this important issue.
An authorized of an entry typically found in this field is as follows: SOPHO.
USERA_Sec_level_n
The security level is a number between 00 and 99. The higher the number,
the more authority a user has. The value 99 is the highest level, and gives
full access to all functionality. The value 00 is the lowest possible value.
Nortel recommends that you initially assign values in 2 or 3 levels and
handle increment by 10. For instance, start with the following values: 20
for low-end users, 40 for power users, and 60 for administrators.
Note: The security level is related to the values specified in the
eWEB_TOC table, where the field WTC_Sec_n level specifies the
minimum required user security level that is needed for a specified
function. For authorized, a user with level 20 can execute all the
functions in WTC_Sec_n with level 00–20.
An authorized of an entry typically found in this field is as follows: 40.
USERA_Description_str
This field contains a description of the user, which usually consists of the
first and last name of the User ID. This field is informational only.
An authorized of an entry typically found in this field is as follows: Francis
Missiaen.
USERA_Email_str
This field specifies the e-mail address of the user. This field is important
when eWEB module is activated, and the Send SMTP Message function
is available to the users. When a user sends an e-mail message through
the Send SMTP Message script, the system checks the username of the
eWEB user, as specified during the login procedure. The e-mail address
Nortel Communication Server 1000
DECT Messenger Installation and Commissioning — Book 2
NN43120-301 02.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.