User's Manual

421

Table: eWEB_SCRIPT_TRACE_AUTH

Note 1: An alarm is only traceable for script message if the

ALA_Trace_b alarm ID related to the script message has the field

ALA_Trace_b in the eKERNEL_ALARM table set to True.

Note 2:

In the current release, traceable alarms are only supported

for script messages.

eWEB_SCRIPT_TRACE_AUTH parameters

Figure 220

eWEB_SCRIPT_TRACE_AUTH parameters

WSTA_Site_id_n

This field specifies the site, as defined in eKERNEL_SITE table. In most

environments, the value is 1.

An authorized of an entry typically found in this field is as follows: 1

WSTA_Area_id_n

This field specifies the area, as defined in eKERNEL_AREA table. In most

cases the value is 1.

An authorized of an entry typically found in this field is as follows: 1

WSTA_Script_id_n

This field must have a value that corresponds with any of the definitions in

eWEB_script table for the eWEB interface.

An authorized of an entry typically found in this field is as follows: 1

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010