User's Manual

eWEB parameters 417

technical specification. Nortel recommends that you keep the message

length less than or equal to the maximum length defined in the associated

eKERNEL_ALARM table.

*FREE is the only other valid entry. This keyword enables the end user

to enter a message.

An authorized of an entry typically found in this field is as follows:

EVACUATION is active

WSC_Min_dev_cnt_str

This field specifies the minimum number of devices that must be selected

from the group by the end user, before a script message can be activated.

The only other valid entry in the current release is *ALL; therefore, all

devices from the group receive the message, so the end user does not

have the opportunity to select devices.

Warning: you must not specify a value larger then the number of devices

present in the group.

Note: In the current release, this parameter has nothing to do with the

number of devices that must receive the message before clearing the

message for all other devices from the group.

An authorized of an entry typically found in this field is as follows: *ALL

WSC_Max_Active_n

This field specifies the maximum number of times this script message can

be active. The keyword *NOMAX can be used to indicate there is no limit.

An authorized of an entry typically found in this field is as follows: 1 (for

EVACUATION) or *NOMAX (for informative messages)

WSC_Currently_Active_n

This field specifies the number of script messages currently active.

This field is used by the eKernel application, and has nothing to do with

configuration of the database.

WSCA_Comments_str

This field can be used by an administrator to enter remarks. The field is

informational only.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010