User's Manual

399

Table: eLOCATION RPN

eLOCATION_RPN parameters

eLOCRPN_Site_id_n

This parameter refers to the site identifier, as defined in eKERNEL_SITE

table. Each eLOCATION instance is uniquely defined through a site and

an area. The eLOCATION_RPN table defines the relation between the

RPNs and the associated text that describes the physical location on the

RPN. For authorized, the DAP Controller with IP address 10.110.49.169

port 28008 is handled by eLOCATION instance site 1 and area 1, and may

feature a number of RPNs, each of them defined in the eLOCATION_RPN

table.

An authorized of an entry typically found in this field is as follows: 1

eLOCRPN_Area_id_n

This parameter refers to the area identifier, as defined in the

KERNEL_AREA table. The eLOCATION_RPN table defines the relation

between the RPNs and the associated text that describes the physical

location on the RPN. For authorized, the DAP Controller with IP address

10.110.49.169 port 28008 is handled by eLOCATION instance site 1 and

area 1, and may feature a number of RPNs, each of them defined in the

eLOCATION_RPN table.

An authorized of an entry typically found in this field is as follows: 1

eLOCRPN_RPN_str

This field contains the hexadecimal identification of the access point

(RPN). The fields eLOCRPN_Site_id_n, eLOCRPN_Area_id_n

and eLOCRPN_RPN_str combine the unique key in the table

eLOCATION_RPN table. The value should be formatted as a two-byte

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010