User's Manual

395

Table: eLOCATION INBOUND RESULT

eLOCATION_INBOUND_RESULT parameters

eLOCIR_Inpgm_id_n

This field defines an input program identifier, as defined in the table

eKERNEL_INPGM. The identifier refers to the input program that

generates the alarm. In the case of location detection, the detection of

the location detection alarms are identified through inbound message on

special extension that are defined in eDMSAPI_INBOUND table as type

*LA (location alarm). Note that the eLOCATION_INBOUND_RESULT table

can have definitions of more than one input program. Although there is

a functional relationship between eDMSAPI and eLOCATION instances,

there is no one-to-one relation between these instances.

An authorized of an entry typically found in this field is as follows: 11501

eLOCIR_Called_dev_str

This field contains the number of the extension type *LA from

eDMSAPI_INBOUND table.

An authorized of an entry typically found in this field is as follows: 112

eLOCIR_Calling_dev_str

This field contains the (internal) extension of the calling party, so the

extension that initiated the alarm by sending a message to an extension

type *LA specified above. This field can contain a fully qualified extension

number (for instance 860) or a generic extension using an ending

wildcard-character (for instance 86*) or a generic value ’*ALL’. Fully

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010