User's Manual

Module - eSNMP

ATTENTION

Due to the ongoing development of the DECT Messenger product suite, some

modules that provide additional functionality may become available after the

initial release of DECT Messenger 4.0.

The following modules are described in this NTP but are not available at initial

General Availability.

• eFR

• eLICENSE

•

eLOCATION

• eSMS

•

eSNMP

• eVBVOICE

The eFR module is an add-on module and is licensed separately through

the eLICENSE module. Some of the modules listed in this attention box are

available only on a site-specific basis.

Architecture

The eSNMP module is able to receive SNMPv1 and SNMPv2 traps sent

from an external SNMP trap sender to DECT Messenger. The eSNMP

module uses an SNMP trap receiver. As a result of a received SNMP trap,

an alarm is activated or deactivated on the Messenger platform.

At startup, eSNMP contacts eKERNEL to request the configuration

of eKERNEL. The IP address and port of eSNMP is configured in the

shortcut. When parameters are absent, the startup values are prompted,

as shown in the following figure.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010