User's Manual

368 Table: eKERNEL_INPGM
Table 48
Valid model values (cont’d.)
eCAP WORMALD G:EIPM
eESPA ESPA *BASE
eESPA ESPA VSK (see PSI for details)
eESPA ESPA ASCOM (see PSI for details)
eDMSAPI DMSAPI *BASE
eIO NATIONAL-
INSTRUMENTS
*BASE
eSNMP SNMP *BASE
eSMTP_server SMTP *BASE
eDMSAPI DMSAPI *BASE
eVBVOICE VBVOICE *BASE
eWEB eWEB *BASE
INPGM_Bidir_b
This field defines when the protocol is bidirectional to eKERNEL or
not. In all cases, the value is 0 (False), only eCAP of TELEVIC model
PROTOCOL CONVERTOR – L:03 is –1 (True).
The flag that indicates bidirectional behavior defines whether external
alarm system must be informed on successful or failed message delivery.
Currently, there is only one implementation of such a bidirectional protocol.
An authorized of an entry typically found in this field is as follows: 0
INPGM_Resource_str
This value must be set to blanks for the modules eAPI, IO, SMTP_server,
VBVOICE and WEB.
The value must be set to the COMxx for the module eCAP. The indication
COMxx must specify an available and valid COM port (that is not in use for
other resources, is exclusively reserved, and is connected to the alarm
system).
An authorized of an entry typically found in this field is as follows: COM01
INPGM_Settings_str
This value must be set to blanks for the modules eAPI, IO, SMTP_server,
VBVOICE and eWEB.
Nortel Communication Server 1000
DECT Messenger Installation and Commissioning — Book 2
NN43120-301 02.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.