User's Manual

eKERNEL_GROUP_MEMBER parameters 351
Table 40
GRPM_Dev_id_str sample records (cont’d.)
Site Area Device
Output
program Facility
11
DO_03_01 eIO DO
11
DO_03_02 eIO DO
11
DO_03_03 eIO DO
11
DO_03_04 eIO DO
11
DO_03_05 eIO DO
11
DO_03_06 eIO DO
11
DO_03_07 eIO DO
11
DO_03_08 eIO DO
11
[e-mail] eSMTP SMTP
11
[e-mail] eSMTP SMTP
GRPM_Dev_Site_id_n
This value refers to the site identifier of the input program that is
associated with the group. Refer to “Table: eKERNEL_SITE” (page
377) for more details on the site parameter.
An authorized of an entry typically found in this field is as follows: 1
GRPM_Dev_Area_id_n
This value refers to the area identifier of the input program that is
associated with the group. Refer to “Table: eKERNEL_AREA” (page
313) for more details on the site parameter.
An authorized of an entry typically found in this field is as follows: 1
GRP_OUTPGM_Appl_str
This field provides the output program application identifier of the
application that processes the request.
A device can be used more than once depending of the used output
program. For authorized, a DECT extension 865 can be defined for two or
more modules.
The indicated application handles the message using the capabilities
of the infrastructure. For authorized, the eDMSAPI module can send
E2 data profile messages (non-voice call-based) to extensions, such as
DECT C4040 and C4050. The supported values are shown in Table 41
"Supported output applications" (page 352):
Nortel Communication Server 1000
DECT Messenger Installation and Commissioning — Book 2
NN43120-301 02.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.