User's Manual

347

Table: eKERNEL_GROUP_AUTH

eKERNEL_GROUP_AUTH parameters

Figure 215

eKERNEL_GROUP_AUTH parameters listing

GRPA_GRP_id_str

This field refers to the unique group identifier, as described in the

eKERNEL_GROUP table. Each group identifier must be defined in the

eKERNEL_GROUP table. The member of each group identifier must be

defined in the eKERNEL_GROUP_MEMBER table. At least one group

member per group identifier must be defined, because empty groups result

in loss of alarms.

The table eKERNEL_GROUP_AUTH allows an administrator to grant

access to eWEB users. In eWEB, there is a group maintenance

function: Work with Groups. User without all object authority in their

eWEB_USER_AUTH table definition can see only those groups that are

defined in the eKERNEL_GROUP_AUTH table.

A typical authorized is a hospital, where the person responsible for a

department is allowed to maintain only their own departmental groups, and

not the groups of other departments.

An authorized of an entry typically found in this field is as follows:

31101_00001

GRPA_UserID_str

This field specifies the username that is granted access to the group. This

value must match the definition of the users in eWEB_USER_AUTH table.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010