User's Manual

340 Table: eKERNEL_DEVICE_FORMAT
Table 33
More indication syntax
0
(no more indication)
1
+
2
+
Note: This value is only implemented on eDMSAPI and eCSTA output
programs.
An authorized of an entry typically found in this field is as follows: 2
FMT_Concatination_b
This field defines whether small messages that fit on one display are
merged to one page. If, for authorized, a DECT C933 extension is defined
as 16/16/0/5/2 and messages are a maximum 16 bytes, you can show two
messages on a single page.
Note:
This value is only implemented on eDMSAPI and eCSTA output
programs.
An authorized of an entry typically found in this field is as follows: -1 (true)
FMT_Scroll_depth_n
This field specifies the maximum number of pages that is shown to a user.
If scroll depth is 4 and there are seven pages available, the user is only
informed on the first four pages. A more indication is shown to indicate
more pages, unless this is suppressed.
Note:
Do not specify any value larger than 4 for the eCSTA output
program, due to limitations in internal resources.
An authorized of an entry typically found in this field is as follows: 4
FMT_AllowEmergency_b
This field is introduced in R3.0 and defines whether the peripheral supports
Emergency LRMS Messaging. Currently this feature is only supported on
DECT C944 devices. Sending an emergency message through eDMSAPI
module to a peripheral that does not support this feature, resulting in a
system malfunction. Administrators must carefully assign the device facility
that enables emergency calls only to peripherals that support it. Assign
the facility only to peripherals that support it. To prevent problems, the
default equals false, so enabling emergency calls on supported devices is
performed only on demand.
Note: This value is only implemented on C944 devices.
Nortel Communication Server 1000
DECT Messenger Installation and Commissioning — Book 2
NN43120-301 02.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.