User's Manual

332 Table: eKERNEL_DEVICE

DEV_Div_OUTPGM_Facility_str

This field specifies the output program of the diverted device.

See DEV_Div_Site_id_n

An authorized of an entry typically found in this field is as follows:

eDMSAPI

DEV_Ras_Site_b

This field is a Boolean value and can be either True (-1) or False (0). The

default value is False (0).

This field is currently not implemented, but is reserved for future

enhancements when multi-site facilities are implemented.

In future versions, eKERNEL-to-eKERNEL communications will be

implemented, so alarms for devices located on another site can be sent to

the remote eKernel.

An authorized of an entry typically found in this field is as follows: False (0)

DEV_Ras_Area_b

This field is a Boolean value and can be either True (-1) or False (0). The

default value is False (0).

This field specifies the behavior of the eWEB-based function Send

DMS-API Message. The Send DMS-API message default only presents

those devices that are defined in the eKERNEL_DEVICE table, and have

output program eDMSAPI and reside on the same site and area as the

eWEB input program. For authorized, if the eWEB application is defined

on site 1 and area 1, the Send DMS-API Message presents the eDMSAPI

devices of site 1 area 1.

Some multi-area environments require that you present devices that are

configured for a remote area. You can select for each device whether the

remote device is available to the local eWEB area or not.

An authorized of an entry typically found in this field is as follows: False (0)

DEV_Comments_str

This field can contain remarks from the administrator, and is informational

only.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010