User's Manual

eKERNEL_DEVICE parameters 331

DEV_Monitor_b

All devices with the value True (-1) are sent to the eCSTA application

and must be monitored for there divert behavior. Those devices that are

diverted are sent to the eKernel application.

An authorized of an entry typically found in this field is as follows: False

(-1).

DEV_IoRegister_b

Set this field to “false for all devices that are not assigned to eDMSAPI

module.

For devices assigned to eDMSAPI module, specify True for devices that

generate action using eDMSAPI module, for *IA (inbound alarm), *IC

(inbound confirm) or *LA (location alarm).

This forces a IORegistration in eDMSAPI, allowing the application to be

able to monitor inbound LRMS activities on the monitored DECT handset.

An authorized of an entry typically found in this field is as follows: -1

DEV_Div_Site_id_n

This field specifies the site of the diverted device.

When a device is diverted to another device (eCSTA), the system ignores

the divert in cases where the destination device is not configured in the

eKERNEL_DEVICE table. When more than one device is defined the

eDMSAPI device type is selected, and the corresponding site is entered

in this field. If no eDMSAPI capable device is defined, the first available

matching device is used, and the corresponding site is entered in this field.

An authorized of an entry typically found in this field is as follows: -1

DEV_Div_Area_id_n

This field specifies the area of the diverted device.

See DEV_Div_Site_id_n

An authorized of an entry typically found in this field is as follows: 1

DEV_Div_OUTPGM_Appl_str

This field specifies the output program of the diverted device.

See DEV_Div_Site_id_n

An authorized of an entry typically found in this field is as follows: 1

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010