User's Manual

eIO_DI parameters 307
eIODI_ALA_Descr_str
The alarm description field is a description defined in the eKERNEL_ALAR
M table for the associated eIO module. In the authorized shown in Table
24 "eIO alarm description" (page 307), an alarm description D-INPUT is
defined with matching records in the ALARM table, as shown in Table 24
"eIO alarm description" (page 307).
Table 24
eIO alarm description
Alarm ID Input program
Alarm
description Remove after Priority
1160101 11601
D-INPUT *SENT
5
1160101 11601
D-INPUT *RESET
5
An authorized of an entry typically found in this field is as follows:
D-INPUT
eIODI_GRP_Name_str
The group name describes what group is informed on the error
condition, and refers to a group defined in eKERNEL_GROUP and
eKERNEL_GROUP_MEMBER table.
An authorized of an entry typically found in this field is as follows: 00003
eIODI_MSG_str
This field describes the message that is sent to the group members. Nortel
recommends that you enter descriptive text that provides the recipient
sufficient information to handle the alarm condition. When selecting a
message, Nortel recommends that you take into account that mobile users
often lack immediate access to other information resources, such as a site
map or technical specs, and keep the message length less than, or equal
to, the maximum length defined in the associated eKERNEL_ALARM
table.
An authorized of an entry typically found in this field is as follows: FIRE
IN ELEVATOR
eIODI_Comments_str
This field is available for an administrator to enter some descriptive text
that allows location and identification of the attached input device and its
usage.
Table 25 "eIO_DI sample data" (page 308) provides sample eIO_DI
module table data.
Nortel Communication Server 1000
DECT Messenger Installation and Commissioning — Book 2
NN43120-301 02.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.