User's Manual

305

Table: eIO_DI

eIO_DI parameters

eIODI_Site_id_n

This field refers to the site identifier, as defined in the eKERNEL_SITE

table. In most environments, this value is 1.

An authorized of an entry typically found in this field is as follows: 1

eIODI_Area_id_n

This field refers to the area identifier, as defined in the eKERNEL_AREA

table. In most environments, this value is 1.

An authorized of an entry typically found in this field is as follows: 1

eIODI_Module_str

This value refers to the 2-byte module identifier, specified in the FieldPoint

Explorer and in eIO_MODULE table. A typical value is between 01 and 08.

Ensure that the table eIO_DI only defines digital input-contacts, thus only

the contacts with a matching digital input module. Current release supports

FP-DI-300, FP-DI-301 and FP-DI-330.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010