User's Manual

293

Table: eIO_AI

eIO_AI parameters

eIOAI_Site_id_n

This field refers to the site identifier, as defined in the eKERNEL_SITE

table. In most environments, this value is 1.

An authorized of an entry typically found in this field is as follows: 1

eIOAI_Area_id_n

This field refers to the area identifier, as defined in the eKERNEL_AREA

table. In most environments, this value is 1.

An authorized of an entry typically found in this field is as follows: 1

eIOAI_Module_str

This value refers to the 2-byte module identifier, specified in the FieldPoint

Explorer and in eIO_MODULE table. A typical value is between 01 and

08. Verify that the table eIO_AI only defines analogue input-contacts

(the contacts with a matching analogue input module). Current release

supports FP-AI-100 modules.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010