User's Manual

285

Table: eESPA_OUTBOUND_CFG

eESPA_outbond_cfg parameters

eESPAO_Site_id

This field specifies the site identifier, as defined in eKERNEL_SITE. This

value is, in most environments, equal to 1.

An authorized of an entry typically found in this field is as follows: 1

eESPAO_Area_id_n

This field specifies the site identifier, as defined in eKERNEL_AREA. This

value is, in most environments, equal to 1.

An authorized of an entry typically found in this field is as follows: 1

eESPAO_ALA_Prty_from_n

This field refers to the ALA_Prty_n field of the table eKERNEL_ALARM,

and defines the priority of an alarm.

A low value indicates an important alarm, a high value a less important

alarm.

With the fields eESPAO_ALA_Prty_from_n and eESPAO_ALA_Prty_to_n

you can specify a range of alarm priorities and set a relationship to the

beepcode record type and the priority record type of the espa datablock.

The Data identifier for the beepcode record type is 3.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010