User's Manual

282 Table: eESPA

eESPA_OUT_Call_type_default_str

This field is only relevant if the eESPA module acts as output program, so

for message sent from the eKERNEL to the eESPA interface.

A <msgrqs> request from the eKERNEL to the espa interface, contains

a tag <call_type> that defines the value for data identifier 4 (call type). If

*NONE is specified, data identifier 4 is not a part of the espa record.

The possible values are: 0, 1, 2, 3, *NONE

In the following authorized, the data in the <call_type> tag from the

message request, must be translated to data identifier 4 (call type) in the

espa record.

Figure 211

Example: eESPA module acts as output program

An authorized of an entry typically found in this field is as follows: 3

eESPA_OUT_Nmbr_transm_default_str

This field is only relevant if the eEPSA module acts as an output program,

so for message sent from the eKERNEL to the eESPA interface.

A <msgrqs> request from the eKERNEL to the espa interface, contains

a tag <transmission_nmbr> that defines the value for data identifier 5

(transmission number). If *NONE is specified, data identifier 5 is not a part

of the espa record.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010