User's Manual

eESPA parameters 277

If this eESPA module acts as an output program: in the current

release, the data identifiers for the espa records are fixed. Therefore,

when a message request is sent by the eKERNEL to the eESPA module,

the data in the <message_xx> tag is put in data identifier 2 (display

message).

In the following authorized, the data in the <message_xx> tag from the

message request, must be translated to data identifier 2 (display message)

in the espa record.

Figure 208

Example: eESPA module acts as output program

An authorized of an entry typically found in this field is as follows: 2

eESPA_Msg_default_str

This field is used to provide a default message, in the event that no value

can be retrieved from the available datastream. In this case, the same

value is used for all alarms generated through this eESPA interface

instance.

This parameter is only relevant if eESPA acts as an input program (so

receives external data from the espa infrastructure.

An authorized of an entry typically found in this field is as follows: ESPA

alarm

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010