User's Manual

259

Table: eDMSAPI_INBOUND

eDMSAPI_inbound parameters

eDMSAPII_Site_id_n

This field specifies the site identifier, as defined in eKERNEL_SITE table.

In most environments, this value is 1.

An example of an entry typically found in this field is as follows: 1

eDMSAPII_Area_id_n

This field specifies the area identifier, as defined in eKERNEL_AREA

table. In most environments, this value is 1.

An example of an entry typically found in this field is as follows: 1

eDMSAPII_Called_dev_str

This field identifies the called device. This is the number of the extension

to which the message was sent.

An example of an entry typically found in this field is as follows: 999

eDMSAPII_Type_str

This value can be *IC or *IA.

These values are interpreted by eKERNEL module of DECT Messenger.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010