User's Manual

eDMSAPI parameters 257

default value for DMC is still 2555, and the recommended default value

for DAP controller and Nortel is 28001; however, depending on the

configuration settings, other values (for example, 2001) are appropriate.

An example of an entry typically found in this field is as follows: 2555

eDMSAPI_PBX_type_str

This field specifies the PBX type used to handle the DMSAPI functionality.

The value is introduced in R3.0. Supported values are DMC, DAP, and

Nortel. Note that the eDMSAPI_PBX_port_str must also be set according

to the recommendations of the PBX type.

An example of an entry typically found in this field is as follows: DMC

eDMSAPI_PBX_licence_str

This keyword specifies the Licence that is used to connect to the PBS.

For DECT Messenger, the licence = Messenger (Licence number = 61)

is used.

Note that you can also use the external licence (external licence number).

An example of an entry typically found in this field is as follows:

Messenger

eDMSAPI_Guarding_Polling_intv_n

This field specifies the polling interval for testing the iSLink in seconds.

The PBX sends a System Status request, with a frequency equal to

eDMSAPI_Guarding_Polling_intv_n seconds.

The guarding process in the eDMSAPI module, which continuously

checks the iSLink connection, automatically re-establishes the

connection when the eDMSAPI_Guarding_Polling_intv_n +

eDMSAPI_Guarding_Retry_intv_n Time is the value in this field.

An example of an entry typically found in this field is as follows: 60

eDMSAPI_Guarding_Retry_intv_n

This field specifies the time to wait in seconds, before retrying to establish

an iSLink after a failed link setup is detected.

An example of an entry typically found in this field is as follows: 20

eDMSAPI_Msg_dly_n

This field specifies the delay in seconds between sending the individual

requests: send normal message and send urgent message.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010