User's Manual

ManualsBrandsAvaya ManualsHandsetsAvaya DECT Messenger with CS1000 Rls 7.0 - Book 2

241

242

243

244

245

246

247

248

249

250

246 Table: eCAP_generic

eCAPG_Line_Omit_str

This value, together with eCAPG_Line_Omit_start_n and eCAPG_Line_O

mit_len_n, is used to optionally define omit criteria, which are used to omit

specific records in a asynchronous datastream.

This value N/A must be used if the omit functionality is not used, indicated

by eCAPG_Line_Omit_start_n and eCAPG_Line_Omit_len_n equal to 0.

This field specifies the characters that are used in the omit pattern

test, which must be a string with length equal to the length defined in

eCAPG_Line_Omit_len_n.

An example of an entry typically found in this field is as follows: /

eCAPG_Field_Sep_str

This field can optionally define field separators. Field separators can be

used when no fixed format of datastreams is available, and individual fields

are to be retrieved from a variable-length datastream.

In most cases, this field is not used, and the special value N/A is specified.

The generic eCAP module is targeted to handle only datastreams that use

a fixed format layout (for example, printer ports typically produce such

formatted data).

When a different value is specified, the characters specified are used

as a field delimiter. For example, the value / can be used to define a

datastream 001/02/ABC. The field separator can later be used to identify

field numbers. In this example, field number 1 is 001, field number 2 is 02,

and field number 3 is ABC.

Note that support for such field-separated datastreams is somewhat

limited in current release, and does not support offsets. For example,

<001/02/ABC> with field separators / fails to handle the < and >

characters, and generates field 1 as <001, field 2 as 02 and field 3 as

ABC>.

An example of an entry typically found in this field is as follows: /

eCAPG_GRP_Name_start_n

This value, together with eCAPG_GRP_Name_len_n and

eCAPG_GRP_Name_field_n, defines the criteria to isolate the group name

parameter in the datastream.

This field refers to the definitions of eKERNEL_GROUP table.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010