User's Manual

14 Module - eSMTP
On startup, the eSMTP application attempts to connect to the eKERNEL.
This is performed based upon the address and port information obtained
from the shortcut.
At connection, the eSMTP requests the eKERNEL to provide additional
configuration settings. This is known as a configuration request.
The eKERNEL in turn authenticates the client and responds with a
configuration reply.
Figure 2 "eSMTP configuration request" (page 14) shows the configuration
request.
Figure 2
eSMTP configuration request
When the configuration is received, a window similar to the one shown
Figure 3 "Configuration information" (page 15) opens. The configuration
can be viewed in the Connections tab.
Nortel Communication Server 1000
DECT Messenger Installation and Commissioning — Book 2
NN43120-301 02.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.