User's Manual

Send Group Message 131

The web user is able only to select from the list of groups that are

configured for that input program.

Note: The web user can submit a message to the eKERNEL, but is

not able to verify that the message actually arrives at the destination

address. One potential issue is that a message can be sent to a group

that is empty (it has no peripherals defined as group members). Another

issue can arise if a group is configured in such way that, due to the

definitions in eKERNEL_GROUP_MEMBER, no one is active in the

group, based upon hour, day, holiday and activation interval issues.

eWEB users must be aware of these possibilities.

In the sample shown in Figure 148 "Group list" (page 131), six groups are

defined (it is advisable to use more descriptive group names than those

shown in the example).

Figure 148

Group list

Send Group Message

The Send Group Message window is shown in Figure 149 "Send Group

Message" (page 132):

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010