User's Manual

124 Module - eWEB

Figure 138

Sign on information

On the lower left-hand side of the window, user status is displayed,

indicating that you are not logged in at this time, similar to the following:

To start working, you must log in with a valid user and password

combination. The password is displayed as a series of asterisks (*) during

entry.

The user and password is checked against the eWEB_USER_AUTH

table. Refer to the documentation for “Table: eWEB_USER_AUTH” (page

439) for more information.

When a valid user and password is found, you are able to continue

working in the eWEB module.

It is important to know that during the sign on procedure, two additional

parameters are fetched: the language code and the security level.

The language code determines the language of the forms that are

presented to the user. If for example the language code is 2909 – Belgian

English, the panels are in English. If the language code is 2963 – Belgian

Dutch, the panels are in Dutch.

The security level determines the table-of-contents options that are

presented to the user. A user with a limited security level has only a

small number of options available, whereas a user with a high security

level has many options available. Refer to the documentation of “Table:

eWEB_TOC” (page 433) for more information on the table-of-contents

mechanism.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010