User's Manual

444 Module - eSMS

The statement in Figure 179 "INI file" (page 443) indicates that in absence

of a /System:xxxx in the shortcut, the default system is used. In the

sample configuration in the following figure, the configuration Module 1 is

set as a default system. This means only Module 1 is used.

Figure 180

Sample configuration

Special circumstances exist where two instances of eSMS and

SMS_service and TC35i can be requested.

For example, if you have a need for high-level redundancy, you can use

SIM cards from two different mobile providers. If one box of SIM card

fails, you can use the other box. You setup a configuration to first send

to devices on eSMS area 1, mobile provider 1, and if NACK occurs, you

use alternative devices defined on eSMS area 2, mobile provider 2. You

alter the shortcuts referring to the desired configuration section shown in

the following figure.

Figure 181

Altered shortcuts

The following figure shows the default configuration.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 1

NN43120-301 02.01 4 June 2010