User's Manual

SMS service 443

Refer to the documentation that comes with the Siemens TC35i

module for installation details.

--End--

SMS service

When you install eSMS, the eSMS module, the SMS_service module,

SMS_service.ini, and SMS_service.exe are installed in the directory:

C:\SOPHO Messenger@Net\Exe.

The SMS_service module is a separate process and communicates with

the GSM box.

SMS_service.exe and SMS_service.ini are two resources related to

SMS_service functionality.

Configure SMS_service through the .INI file. The default values suit most

environments. You can change the parameter COM Port if COM1 is not

available. Change the value according to your environment, for example

specify 3 if COM3 is available.

In the sample file illustrated in Figure 178 "Default configuration section"

(page 443), there is a single INI file. There can be more than one instance

of SMS_service with multiple Siemens TC35i boxes. In most cases, only

one Siemens TC35i is used and only a single instance of eSMS and

SMS_service is used.

When the service is started with the following shortcut, the default

configuration section is used.

Figure 178

Default configuration section

The default configuration is configured in INI file with the statements shown

in the next figure.

Figure 179

INI file

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 1

NN43120-301 02.01 4 June 2010