User's Manual

426 Module - eLOCATION

Initialization

You use a shortcut to start the eLOCATION module. The following figure

shows an example of the required keywords.

Figure 159

eLocation module keywords

The following keywords are used to start the eLocation module.

• The "site" keyword indicates the site that is assigned to the

eLOCATION module

• The "eKernel address" keyword indicates the IP address that is

assigned to the eKERNEL module. The eLOCATION contacts this IP

address to connect to the eKERNEL

• The "eKernel port" keyword indicates the port number that is assigned

in the configuration for the eLOCATION client instance.

When the "eLOCATION" application starts the application attempts to

connect to the "eKERNEL". The attempt to connect is based upon the

address and port information obtained from the Shortcut.

At connection, the "eLOCATION" requests that the "eKERNEL" provide

additional configuration settings. This request is known as a configuration

request. The "eKERNEL" then authenticates the client and responds with

a "configuration reply".

The following figure illustrates the initialization procedure.

Figure 160

Initiation procedure

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 1

NN43120-301 02.01 4 June 2010