User's Manual
404 Module - eIO
Figure 144
Digital Output module information
Note 1: When the value of a contact changes from Off to On or from
On to Off, the Before and After fields are updated with the status of
the contact before the change occurred and the status of the contact
after the change occurred. The Change field is also updated with the
new value.
Note 2: You can also change the status of the contacts to On or Off by
using the mouse to drag the switch to the On or Off position. This must
be carried out only while installing or testing. In most environments, the
eKERNEL application is responsible to activate or deactivate the alarm
condition of the discrete outputs. You can however manually reset a
status of a contact, for example, if manual intervention is required.
Logging
The eIO module provides logging facilities, both on-screen and on log files
on disk.
The on-screen logs are visible through the Logging tab, as shown in Figure
145 "eIO logging" (page 405).
Nortel Communication Server 1000
DECT Messenger Installation and Commissioning — Book 1
NN43120-301 02.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.