User's Manual

380 Module - eFR

Adding a <System> definition for each system that you want to monitor.

The window in the following figure shows two definitions, one for address

127.0.0.1 and another for address 192.168.1.12.

Figure 117

Monitoring type PING configuration

The definition of a system that needs to be monitored with PING is done

using a <System> line.

Figure 118

Monitoring type PING definition

The following parameters are available.

• Define the parameter id with a unique identifier of the monitored item.

All items must have a unique identifier. For example, Lookback is an

identifier. Nortel recommends that you specify a name meaningful to

you to make future maintenance easier. For example, specify names

such as Mail Server, Firewall, Router, IP DECT, and so on.

• Define the parameter "address" to specify the IP address used in the

PING test using ICMP protocol.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 1

NN43120-301 02.01 4 June 2010