User's Manual

376 Module - eFR

• The default value is 600 seconds

• The minimum value is 60 seconds. Every minute a verification cycle

takes place. When a value smaller than 60 is configured, the system

adjusts it to 60 seconds

• The maximum value is 86400 seconds, so once a day a verification

cycle takes place. When a larger value than 86400 is configured, the

system will adjust to 86400 seconds.

Note: The processing cycle takes some time, for example PING

to a large number of systems that are not responding increases

processing time. Since the interval effects the time between ending

the previous verification and starting a new verification, the exact

frequency is somewhat larger than the specified interval, depending on

the processing time.

Monitoring type DISK

The monitoring of disk drives is configured through the section in the XML

file shown in the next figure.

Figure 107

Monitoring type DISK

The opening tag <DISK> and the closing tag </DISK> provide space for

configuring the drives that must be monitored. You can define each drive

that needs to be monitored in the section between </Drives>.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 1

NN43120-301 02.01 4 June 2010