User's Manual

Monitoring 375

Monitoring

The monitoring section is defined in the eFR.xml file.

The monitoring section starts with the tag </Monitoring>. Within the tag are

the following subsections.

•

OM section is not applicable for traditional and SIP DECT systems

•

DISK is available starting with <DISK> and ending with </DISK>

• PING is available starting with <PING> and ending with </PING>

• NETSTAT is available starting with <NETSTAT> and ending with

</NETSTAT>

The following figure illustrates the monitoring section and subsections.

Figure 106

Example of monitoring section and subsections

The parameter interval, with a default value of 600, specifies the frequency

at which the monitoring process takes place. When a value of 600 is

specified, a delay of 600 seconds takes place between the last monitoring

action and the next monitoring action. The eFR module captures

information about the configured items roughly every 10 minutes.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 1

NN43120-301 02.01 4 June 2010