User's Manual

Destinations 371
a Windows pop-up message on a destination PC with a
Windows operating system.
• SMS
SMS is used with SMS technology to send a SMS message
to a destination mobile GSM phone.
•
SMTP
SMTP is used when sending an e-mail message by means
of an SMTP enabled mail server infrastructure, resulting in
delivery of an e-mail message to the inbox of the destination
addressee.
• SNMP
SNMP is used when sending SNMPv1 trap to a destination
SNMP trap receiver.
--End--
Depending of the selected notification type, define additional parameters
as needed. Typically, additional parameters define the remaining values
that are specific to the selected transport mechanism, and contain
information to identity the destination user or device, as well as parameters
that define the intermediate infrastructure.
The following Destination types are described in this chapter.
•
Destinations type NET
•
Destinations type SMS
•
Destinations type SMTP
•
Destinations type SNMP
Destinations type NET
The following figure illustrates Destinations type NET.
Figure 101
Destinations type NET
The following parameters are specific to NET.
Nortel Communication Server 1000
DECT Messenger Installation and Commissioning — Book 1
NN43120-301 02.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.