User's Manual

330 Module - eCAP
27/04/99 19:56:12
Reset
This datastream results in a *RESET of alarm description *ALL for group
*ALL and message *ALL.
Table 16
RUCA
0000. Brand
Boodschap
MG 099 MLD 009 01:01:00 01.01.97
This datastream results in a *SET of alarm description WORMALD_F, with
message Boodschap and remove after *RESET.
The group varies depending on the model
Table 17
F8000 REV EVACUA groups
Model
Group
*BASE WORMALD_F.
L:01 B
L:02 Bo
L:03 Boo
L:04 Bood
G:EIPM EIPM for all alarms
0001. Reset
This datastream results in *RESET of alarm description *ALL for group
WORMALD_F with message *ALL and remove after *RESET.
Note: Use of this protocol usually requires consulting services and
customization.
Generic
Valid manufacturer is GENERIC, valid model is *BASE.
This new manufacturer and model combination is implemented in release
2, to handle fixed-formatted serial inputs that are built upon single lines
and separated with a fixed character.
There are many parameters available to define the interpretation of the
datastreams that are received through the generic eCAP implementation.
These parameters define criteria for retrieval of group, message, alarm
Nortel Communication Server 1000
DECT Messenger Installation and Commissioning — Book 1
NN43120-301 02.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.