User's Manual

Functional description 315

datastream. When BRAND occurs the message is BRAND; in other cases

the message is ARITECH. When HERSTEL occurs a general reset of all

ARITECH alarms is issued.

Note:

Use of this protocol usually requires consulting services and

customizing.

Figure 67

ARITECH Model 1 alarm (based upon installation RUCA)

Aritech model 1 alarms are always sent to group ARITECH_F,

ARITECH_C, or ARITECH_B, depending on the datastream.

Messages are sent with alarm description ARITECH_F, ARITECH_C, or

ARITECH_B, depending on the datastream.

Alarms are *SET with option *CALC.

To define alarms, remove after *RESET.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 1

NN43120-301 02.01 4 June 2010