User's Manual

ManualsBrandsAvaya ManualsHandsetsAvaya DECT Messenger with CS1000 Rls 7.0 - Book 1

261

262

263

264

265

266

267

268

269

270

Upgrade DECT Messenger within release 4.0 267

ATTENTION

If you skipped uninstalling unchanged components, you can skip the

reinstalling of the unchanged components.

ATTENTION

After installing 02.01 - Nortel DECT Messenger, copy the file

Messenger_CFG.MDB saved in the procedure Procedure 62

“Upgrading DECT Messenger from 3.0 to 4.0” (page 263) into the

C:\SOPHO Messenger@Net\Mdb.

2 If you saved \Log or \eLOG, restore this data.

3 Make sure the system restarts all modules either through

shortcuts in startup group (not recommended), or through task

manager in startup group (recommended). You can use the

information you saved in the procedure Procedure 62 “Upgrading

DECT Messenger from 3.0 to 4.0” (page 263).

When eKERNEL R4.0 is launched for the first time, the

needed upgrade actions are performed automatically on the

Messenger_CFG.Mdb.

A Message Box informs you on the different database changes

applied. This includes support for new modules, such as

eLOCATION, eSMS, eSNMP, eOAI, eOAP, and so on, but

also other database changes related to the new functionality

introduced.

4 Uninstall and install eCONFIG instances installed on other

systems in the network as well.

In some environments eCONFIG is not only available on the

main system running eKERNEL, but also on networked PCs of

departmental administrators.

ATTENTION

Never reuse or apply an old configuration generated with eCONFIG

prior to R4.0. At prompt of eCONFIG that a working database is

available, reply No.

--End--

Upgrade DECT Messenger within release 4.0

This section describes how you can apply changes within DECT

Messenger release 4.0.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 1

NN43120-301 02.01 4 June 2010