User's Manual

266 Install PC - Upgrade DECT Messenger
An install from scratch is a recommended option if you want to replace
hardware, replace operating system, or you suspect your system is
malfunctioning.
Procedure 64
Installing from scratch (not recommended)
Step Action
1 Verify the following.
•
Record the Computer Name and presence in workgroup of
domain.
• Record the Network Setting, such as IP address, subnet
mask, and default gateway.
• Record if ROUTE PRINT shows persistent routes.
• Record what third-party hardware and software are available,
and determine if you have the drivers and software to
reconfigure that hardware, for example a more recent
operating system, such as Moxa adapter, PCI boards, and
so on.
•
Record the usage of COM-ports, for example COM1 for
eCAP, COM2 for pcAnywhere, and so on.
• Ensure you have the License file for the dongle that licenses
the system.
• Make a backup image of the PC, for example with GHOST
software.
2 Now you can scratch install the system. Apply the changes
gathered in the previous step, for example Computer Name, IP
address, and so on.
--End--
Follow the steps in the next procedure to complete the Upgrade of DECT
Messenger from 3.0 to 4.0.
Procedure 65
Completing the upgrade from 3.0 to 4.0
Step Action
1 Install DECT Messenger based upon the latest CD-ROM.
Follow all steps in the documentation. Install all prerequisites
and components as described in steps 00 to 09.
Nortel Communication Server 1000
DECT Messenger Installation and Commissioning — Book 1
NN43120-301 02.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.