User's Manual

Upgrade DECT Messenger from 2.9 to 4.0 261
• Prerequisites
•
Philips License Manager
•
Philips DMS-API Service
•
Apache HTTP Server
•
Adobe Acrobat Reader
•
NI DataSocket
•
NI FieldPoint Explorer
•
PHP 4.x.x
• Dialogic System Release
•
VbVoice 4.x
Note: Some items may not be present in you system.
To continue the upgrade of DECT Messenger, follow the steps in
the procedure Procedure 61 “Completing the upgrade from 2.9
to 4.0” (page 262)
--End--
Follow the steps in the next procedure to install DECT Messenger release
4.0 from scratch. Installing from scratch formats the system and erases all
the data. Again, only perform a scratch install if you have good reasons
to do so, as it increases downtime and involves additional risks, as more
steps are involved.
An install from scratch is a recommended option if you want to replace
hardware, replace operating system, or you suspect your system is
malfunctioning.
Procedure 60
Installing from scratch (not recommended)
Step Action
1 Verify the following.
• Record the Computer Name and presence in workgroup of
domain.
• Record the Network Setting, such as IP address, subnet
mask, and default gateway.
• Record if ROUTE PRINT shows persistent routes.
• Record what third-party hardware and software are available,
and determine if you have the drivers and software to
reconfigure that hardware, for example a more recent
Nortel Communication Server 1000
DECT Messenger Installation and Commissioning — Book 1
NN43120-301 02.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.