User's Manual

258 Install PC - Upgrade DECT Messenger
Follow the steps in the next procedure to complete the Upgrade of DECT
Messenger from 2.8 to 4.0.
Procedure 57
Completing the upgrade from 2.8 to 4.0
Step Action
1 Install DECT Messenger based upon the latest CD-ROM.
Follow all steps in the documentation. Install all prerequisites
and components as described in steps 00 to 09.
ATTENTION
After installing 02.01 - Nortel DECT Messenger, copy the file
Messenger_CFG.MDB saved in the procedure “Upgrade DECT
Messenger from 2.8 to 4.0” (page 254) into the C:\SOPHO
Messenger@Net\Mdb.
2 If you saved \Log or \eLOG, restore this data.
3 Make sure the system restarts all modules either through
shortcuts in startup group (not recommended), or through
task manager in startup group (recommended). You can use
the information you saved in the procedure “Upgrade DECT
Messenger from 2.8 to 4.0” (page 254).
When eKERNEL R4.0 is launched for the first time, the
needed upgrade actions are performed automatically on the
Messenger_CFG.Mdb.
A Message Box informs you on the different database changes
applied. This includes support for new modules, such as
eLOCATION, eSMS, eSNMP, eOAI, eOAP, and so on, but
also other database changes related to the new functionality
introduced.
4 Uninstall and install eCONFIG instances installed on other
systems in the network as well.
In some environments eCONFIG is not only available on the
main system running eKERNEL, but also on networked PCs of
departmental administrators.
ATTENTION
Never reuse or apply an old configuration generated with eCONFIG
prior to R4.0. At prompt of eCONFIG that a working database is
available, reply No.
--End--
Nortel Communication Server 1000
DECT Messenger Installation and Commissioning — Book 1
NN43120-301 02.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.