User's Manual

Upgrade DECT Messenger from 2.8 to 4.0 255
2 Make a backup of your current environment.
Create a ZIP-file containing the following directories (if available)
C:\SOPHO Messenger C:\SOPHO Messenger@Net eCONFIG
Note: Store the ZIP-files in a safe location, especially if you
plan to format the PC to scratch install a new operating
system.
3 Make a copy of any important items you do not want to lose.
4 Copy the file "Messenger_CFG.MDB" residing in "C:\SOPHO
Messenger@Net\Mdb".
This file is very important and is needed later on as it contains
your entire configuration.
5 Preserve logging data, if desired.
Store the contents of the following directories (if available).
• C:\SOPHO Messenger@Net\Log
• C:\SOPHO Messenger@Net\eLOG
6 If you are using National Instruments infrastructure, make sure
you have a copy of the configuration file.
This is a file that usually has the extension IAK. You can produce
the file using the Fieldpoint Explorer tool.
7 If you launch eKERNEL and other processes through shortcuts,
make sure you have a copy of these shortcuts.
The shortcuts probably reside in the Startup group of the
Administrator and launch automatically with automated windows
logon.
8 If you use the Task Manager or Task Manager High Availability,
export the registry HKEY_CURRENT_USER\Software\Philips\SO
PHO Messenger@Net.
Make sure you have a copy of this REG-file to be applied
again later. You probably have a shortcut to eTM or TM_HA
residing in the Startup group of the Administrator and launched
automatically with automated windows logon.
9 To continue with the upgrade of DECT Messenger 2.8 to 4.0,
choose one of the following two procedures.
• Procedure 55 “Uninstalling previously installed items
(recommended)” (page 256)
• Procedure 56 “Installing from scratch (not recommended)”
(page 257)
Nortel Communication Server 1000
DECT Messenger Installation and Commissioning — Book 1
NN43120-301 02.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.