User's Manual

Install the board 227

--End--

Install the board

Procedure 50

Installing the board

Step Action

1 Power off the PC and disconnect all power cables.

2 Install the Dialogic adapter in a suitable PCI slot.

See the manual Pronexus – Voice Card Setup that came with

your board for mode information.

WARNING

Adjust the rotating address switch on the board to the address 0.

There is a small switch in the middle of the board that can adjust

to cause all lines to start at boot time in onhook position. The

factory default setting starts the board with all lines in off-hook

position, which leads the lines to an Out of Service position and

a failing startup environment for eVBVOICE. This can result in

inability to handle the first or all calls within eVBVOICE.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 1

NN43120-301 02.01 4 June 2010