User's Manual

Editing eCONFIG.ini 209
When eKERNEL is started, the first tab shows the eCONFIG module. In
Figure 27 "eKERNEL interface" (page 209), eKERNEL is shown with IP
address 10.110.49.170 port 9000.
Figure 27
eKERNEL interface
When the eCONFIG task is started, you must enter a valid user and
password as shown in Figure 28 "eCONFIG Signon" (page 209). The
information you enter is compared to the eCONFIG_USER table in
Messenger_CFG.MDB.
Figure 28
eCONFIG Signon
The default installation provides two Users:
User = admin, Password = admin
User = sa, Password = BEFMI@A31
Nortel Communication Server 1000
DECT Messenger Installation and Commissioning — Book 1
NN43120-301 02.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.