User's Manual

Editing eCONFIG.ini 207

Figure 24

eCONFIG.ini default

In this case, the parameter Messenger_CFG is not defined, and the user

is prompted to select the Messenger_CFG database on the PC that runs

eKERNEL. This is usually found in the path

C:\SOPHO Messenger\Mdb

, on the system that runs eKERNEL. To prevent the software from

prompting for a database file at startup, set the path and filename in the

eCONFIG.INI file.

ATTENTION

Branding notice

To support both SOPHO and NORTEL environment, additional tags are

available in the eCONFIG.INI file. These tags provide internal steering

parameters for the user interface of the eCONFIG instance. Do not alter or

remove these statements. Tampering with branding related information can

violate copyright regulations.

• When your run eCONFIG on a local machine, your can enter the path

C:\SOPHO Messenger@Net\Mdb\Messenger_CFG.MDB manually, as

shown in Figure 25 "eCONFIG.ini for local machine" (page 207).

Figure 25

eCONFIG.ini for local machine

•

When you run eCONFIG on a distributed machine, you can enter the

path that refers to the location of the Messenger_CFG database file

on the machine that runs eKERNEL. This means the directory where

the file resides must be shared, so that remote machines can access

the shared database. For example, if the drive is shared as MDB

on eKERNEL system 10.110.50.138, you can specify the values as

follows:

Messenger_CFG=\\10.110.50.138\MDB\Messenger_CFG.MDB

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 1

NN43120-301 02.01 4 June 2010