User's Manual

142 Install PC - Step 3 - National Instruments

Follow the steps in Procedure 28 “Check which firmware you are

currently using” (page 137).

--End--

Use the following instructions if you use FieldPoint Explorer 3.0.0 or

higher. The steps are slightly different if you are using an older version.

Procedure 31

Downloading ﬁrmware for the FP-1600

Step Action

1 Go to the NL Software Library web site.

•

Launch your internet browser.

•

Go to the Driver and Firmware download page on

ttp://www.ni.com(Support > Product Reference > Drivers

and Updates > All Software Versions > Distributed I/O

- Fieldpoint).

2 Download the firmware.

Browse in the list titled Firmware, and:

•

Click FP-1600 Firmware Revision 417 for Windows.

• Click continue the download process.

•

If you are not already logged in, log in to the Web site as

prompted.

•

Download the firmware file.

•

Unzip the archive.

3 Open the Comm Resource Configuration dialog box.

Launch FieldPoint Explorer. Right-click the comm resource of

your FP-1600 and select Edit this device.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 1

NN43120-301 02.01 4 June 2010