User's Manual

ManualsBrandsAvaya ManualsHandsetsAvaya DECT Messenger with CS1000 Rls 7.0 - Book 1

131

132

133

134

135

136

137

138

139

140

140 Install PC - Step 3 - National Instruments

Table 7

Minimum firmware revision required for each of the FieldPoint I/O modules (cont’d.)

Network

Modules

Minimum

FP-1000/1001

Firmware

Minimum

FP-1600

Firmware

Minimum

FP-2000/2010

Firmware

Minimum

FP-3000

Firmware

FP-PWM-520

24 0100 1.0.21 1.0

Relay Modules

————

FP-RLY-420

14 0100 1.0.21 1.0

FP-RLY-422

14 0100 1.0.21 2.3.5

Quadrature

Input Module

————

FP-QUAD-510

25 0200 1.0.21

—

Dual Channel

Modules

————

FP-TB-10

28 0320 1.0.21

—

If the firmware revision you are using does not meet the needs of your

I/O modules, you must upgrade your firmware. Continue to one of the

following sections, depending on which network module is installed:

• Procedure 30 “Downloading firmware for the FP-1000/1001” (page

140)

• Procedure 31 “Downloading firmware for the FP-1600” (page 142)

Note: Nortel recommends the Firmware Revision 30 or later for

FP-100x, and Revision 417 or later for FP-160x. These versions are

shipped on the CD-ROM, or you can download them from the web

site as described in Procedure 30 “Downloading firmware for the

FP-1000/1001” (page 140).

WARNING

To protect your FieldPoint system when downloading firmware

for the FP-1001, isolate your FP-1001 and your computer from

the rest of your FieldPoint system.

Procedure 30

Downloading ﬁrmware for the FP-1000/1001

Step Action

1 Go to the NL Software Library web page.

• Launch your web browser.

• Go to the Driver and Firmware download page on

ttp://www.ni.com(Support > Product Reference > Drivers

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 1

NN43120-301 02.01 4 June 2010