User's Manual

Launching FieldPoint Explorer 135

Table 6

Example 2 - FP-1600 module (cont’d.)

Step

Action

Note 1: This illustration shows a typical configuration. You can press Suggest

Values for the FieldPoint Explorer to suggest values.

Note 2: If you are using a network, ask the network administrator to assign a unique

IP address to your Ethernet network module.

Apply your changes.

Click Apply, and then click OK in each of the successive windows until you return

to the window shown in the following illustration:

8 Find connected modules.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 1

NN43120-301 02.01 4 June 2010