User's Manual

134 Install PC - Step 3 - National Instruments

Table 6

Example 2 - FP-1600 module (cont’d.)

Step

Action

•

Select your Ethernet network module.

• Double-click its serial number. The following window appears:

Configure the network settings.

Enter values for:

• IP address

• Subnet mask

• Time Server IP

The IP address is the address of your Ethernet network module on the network,

the Subnet mask is the mask that the device uses to find other devices on the

Ethernet network (255.255.255.0 is the most common), and the Time server IP is

the address of the host computer connected to your Ethernet network module.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 1

NN43120-301 02.01 4 June 2010